How to check whether the car lights are working properly
Hazard warning lights, turn signal lights, reversing lights, brake lights, high brake lights, license plate lights, etc. In the new car inspection notice, it is essential to check the car lights. Therefore, it is necessary to check carefully. In addition, checking this step generally requires two people to cooperate. After all, when you step on the brake, you can go and see if there is a problem with the rear brake light.
The following car lights are mainly inspected carefully:
Front turn signal and side turn signal check: amber, turn on when changing lanes to remind you to move forward and backward.
Check the reversing light: When the car owner is reversing, it is similar to a white transparent light, which is mainly used to remind pedestrians, obstacles and rear lights.
Brake light inspection: red, mainly divided into left and right brake lights and high-position brake lights. When there is an obstacle in front, after stepping on the brake, the three rear brake lights will light up to prevent rear-end collision.
Low beam, high beam inspection: white, the high beam on the market now is a halogen lamp or a xenon lamp. In the car light inspection, the high beam is easy to be overlooked, so be sure to remember to check carefully.
Fog lamp inspection: yellow, divided into front fog lights and rear fog lights. Mainly used for opening in rainy and foggy weather. Due to the relatively low visibility in rainy and foggy days, the yellow fog lights are more penetrating, which can remind others to spot their vehicles early.
After checking various vehicle lamps, check whether the lampshade is foggy. If there is fog, it may be that the sealing of the lamp is not good. This step is often ignored in the new car inspection notice, because the new car has not started yet, and sometimes it is difficult to check out even if the seal is poor. So, if possible, pour a little water on it to better check it.
Next, it is necessary to check whether the car lights are installed smoothly and whether they are consistent with the surrounding boundaries. Sometimes, improper installation of the lamp may cause the gap between the lamp and the surrounding to be too large, small or uneven. Check whether the lamps on both sides are symmetrical.
Friendly reminder: Light inspection of the car is a relatively simple step in all new car inspection instructions. However, because the lights during the installation process are relatively prone to problems during the installation of the entire vehicle, so in this link of inspection, we should handle it seriously.